Kodak Alaris Inc.

WIA Standard Properties

11-November-2013

 

 

Contents

1.     WIA_DPS_DOCUMENT_HANDLING_SELECT

 

1. WIA_DPS_DOCUMENT_HANDLING_SELECT

 

The following table lists the WIA_DPS_DOCUMENT_HANDLING_SELECT values that Kodak Alaris Inc.’s WIA driver supports. The table also describes when each value is supported. Prior to deciding which settings to use, the WIA application should always check to see which values of this property are valid.

 

Value

Hex

Decimal

Supported If

What is scanned

FEEDER

0x1

1

Always

Front Side of ADF1

FLATBED

0x2

2

Scanner has a flatbed

Flatbed

DUPLEX

0x4

4

Scanner supports duplex scanning

Both Sides of ADF1

FRONT_ONLY

0x20

32

Scanner supports duplex scanning

Front Side of ADF1

BACK_ONLY

0x40

64

Scanner supports duplex scanning

Rear Side of ADF1

 

1 If no paper is found in the ADF and the scanner has a flatbed, the Kodak Alaris Inc. WIA driver will automatically scan from the flatbed; even if FLATBED is not selected.